Posts Tagged ‘arduplane’

New Version of Ardustation 2 – 2.0.17 Compatible with Arducopter 2.9.1

Tuesday, March 5th, 2013

This release is for Mavlink changes in ACM 2.9.1. The message location of the number of GPS satellites has been changed for ACM. Ardustation II 2.0.16 will display 0 GPS satellites with 2.9.1.

I’ve also added an additional antenna range/bearing as suggested by James Masterman. He reported antenna pointing issues at long ranges at his location in Australia. This algorithm seemed to fix his problem. I’ve tested both algorithms using a simulation and the results seem to be very close. I’ve left the default algorithm originally provided by 3DR but you can select the alternate algorithm by pressing the center button on the pad while on the antenna range/bearing display. The display will show ALG 1 for the new algorithm and ALG 0 for the old.

I’ve tested the software with my quad on ACM 2.9.1 and an APM 2.5. I have not tested this software with Arduplane 2.7, but I expect it to still work and appreciate any reports of problems by users.

The software is available at the usual spot:

Ardustation II Google Code Repository

Please be sure to download the zip file to a empty folder and to only use the library folder contained in the distribution. Do not merge this library folder with either the ACM or APM library folders. This software should be compiled with Arduino 1.0.3 or Arduino 1.0.1. Do not use the earlier versions as indicated in the Ardustation wiki.

 

New Ardustation 2 2.0.15 Mavlink 1.0 Support

Tuesday, June 5th, 2012

I’ve just uploaded the latest Ardustation 2 release – 2.0.15 which adds Mavlink 1.0 support. This is to support the upcoming releases of ACM and APM with Mavlink 1.0. You can still use this release with Mavlink 0.9 by commenting out the “#define MAVLINK10” statement in the main ardustation2.pde file.
This version will also warn you if it detects the wrong Mavlink heartbeat being transmitted. Ardustation 2.0.15 will display an error message on the LCD when it detects the wrong heartbeat and direct you recompile with the opposite state of the #define MAVLINK10 statement. The start up message displayed on the LCD will indicate if you have compiled for Mavlink 1.0 or Mavlink 0.9.
I’ve have tested Mavlink 1.0 with ACM 2.6 Gamma, APM 2.4 (with Mavlnk 1.0 enabled) and with the Mavlink 1.0 version of the Mission Planner.
As always, please let me kinow if you have any issues with this release.

http://code.google.com/p/ardustation-ii/downloads/list
and is also available in my git clone here:
http://code.google.com/r/hrpull-ardustationii/source/checkout
and you will need a git client to pull the clone down.